Innovation

Welcome to MEF Pre-Fabrication and Assembly…

MEF has operated a fabrication service for some 23 years, and we have made a significant investment in plant, machinery and materials over that period.

We currently operate an unrivalled fabrication service with our sector, with a skilled labour force to back it up.

Pre-Fabrication and Assembly

We operate various machinery including, a 50T metalworker, spot welding machine, various band saws and a full welding facility.

Whether it is large or small quantities we “jig” all bracketry to ensure consistency of size and quality. Pipework and Electrical containment can be pre-fabricated
into the brackets prior to delivery to site, freeing up the skilled labour on site, and taking away the uncertainty of predicting site labour hours.

Channel Cutting

MEF have the capacity to cut
1000no. Lengths of strut per day
• 2no. 3-phase band saws
• Strut is “cold cut” so no de-burring
required
• High precision
• 24 hour service
• All ends sprayed and end capped (if
specified)

Support Bracket Fabrication

No Hot Works Permits required on site. Safer working
• Increased accuracy in fabrication. Jigs used for large volumes
• Reduction of waste at site
• Efficient use of skilled labour
• Faster install time
• Fixed cost for bracketry
• Precision cutting of strut

Modular Fabrication

• Reduce on-site fabrication
• Reduce site man hours
• Reduce wasted material
• 3m or 6m length
• Bespoke lengths for bends, tees and sets
• Manufactured to contractor design
• Just in time delivery
• Reduce Total Installed Cost

Innovative Containment Solutions

Proven Solutions for Innovative Installation
• Basket & Tray Trunking
• Combining two systems to
form a multi-service
containment solution
• Project Specific
• Faster Installation
• Up to 75% labour saving

Contact us

Distribution Board Fabrication

Distribution Board Fabrication
• Contractor orders boards from
normal channel
• Deliver to MEF
• Site supplies trunking/slot/breaker
requirements (template available)

ROLLATRAY

Manufactured with medium duty 0.8mm
pre-galvanised sheet steel to BS EN 10346
:2009
• Meets the Earthing requirement of BS EN
61537:2007
• Simplistic install designed to make a
massive 90% labour saving on site.

CONLOK

An MEF developed system now
widely utilised in the market
• Fully tested to BS EN 61386-
21:2004
• CONLOK exceeds the current
Standard for Earth Continuity

Strutfoot

• MEF Ltd are one of the largest
distributors in UK & Ireland for
custom frames for AHU’s, VRV
and Condenser Units

• Partner with Strutfoot

• Full design and drawing
supplied

Contact us

Innovation MARCO Couplers & Strut Clips

MCSSC Couplers enable two lengths of tray to be coupled together and
secured in seconds, reducing installation times
• Meets and exceeds earth continuity requirements to standard EN 61537.
• Can be installed from within the basket giving ease of installation within
confined areas.

TAPCON Fixings

Tapcon Fixings Designed to Reduce
Installation time for contractors
• Smaller hole diameters – faster drilling
• Less exposure to hand/arm vibration
• Setting tools that set the fixing
correctly
• Site testing available

Gripple

Faster Installation
• Reduced inventory
• Less material for
installation
• Less impact on the
environment
• Fire Rated Solutions

Gripple Fast Trak

Quick - up to six times faster than traditional suspension systems

Safe - pre-fabricated system which removes the need to cut threaded rod or channel on-site

Tool free adjustment - bracket can be moved up and down the tracks to accommodate changes in position during installation

Zero waste - tracks bend neatly under bracket*

Contact us

SIKLA SiFRAMO

siFRAMO is a closed box section that is
far more solid than ‘open’ U-shaped
sections
• Bolted connections
• Replacement for secondary welded
steel structures. HDG finish
• Full design capability
• Stocked at MEF

MEF Earth Bars

MEF manufactures a full range of
Earth Continuity Bars in house
• Earth Bars are manufactured from
50mm x 6mm Hard Drawn Copper
Bar
• Four hole to twenty Hole Earth
Bars with or without disconnecting
link, direct from stock

Innovation METSEC Pre-Galv Ladder

• Made from pre-galvanised steel
grade S280 with a 275g/m2 zinc
coating
• Conforms to BS EN 61537:2007 for
cable management, cable tray
systems and cable ladder systems.

Innovation METSEC IP4X Trunking

IP4X Trunking System
• IP4X specifies that a 1.0mm
probe cannot be inserted into
trunking joints
• METSEC have developed a
retro-fit system of covers
• No need to specify IP4X at the
start of a project

Contact us

CMP Cable Cleats

CMP Products offer a range of cleats that are
both comprehensive and diverse, designed
for use within industrial areas and hazardous
locations
• Specialist applications such as railway and
underground, oil and gas, and petrochemical
• Tested in accordance with IEC 61914:2009 to
ensure that regardless of the cable formation
used on the installation there is a suitable
cleat.

Trefoil Cleats

Third party certification to IEC
61914:2009
• 316L stainless steel
• 19-130mm in 16 sizes for trefoil
formation/application
• Short circuit rating of 170kA peak fault
• Operating temperature -40°C to +60°C
• Low Smoke & Fume (LSF) liners as
standard
• Combined single (M12) and two bolt
(M10) fixing design

Innovation METSEC Pre-Galv Ladder

• Made from pre-galvanised steel
grade S280 with a 275g/m2 zinc
coating
• Conforms to BS EN 61537:2007 for
cable management, cable tray
systems and cable ladder systems. • Manufactured using an innovative
clinch method to stop galv being
burnt away

Innovation METSEC IP4X Trunking

IP4X Trunking System
• IP4X specifies that a 1.0mm
probe cannot be inserted into
trunking joints
• METSEC have developed a
retro-fit system of covers
• No need to specify IP4X at the
start of a project
• No requirement to dual stock
trunking to meet the IP4X
requirement
• Easily fitted on-site using
existing screws

Contact us